| What problems should be paid attention to when the knitting machine is used for a long time |
| Hits：988 AddTime：2020/11/25 11:20:15 |
| What problems should be paid attention to when the knitting machine is used for a long time? Some parts, such as knitting machine spindle frame, slide seat, etc., should be repaired or replaced. After disassembling and assembling new parts, the precise distance between the sliding base and the braided wire spindle must be ensured. It is recommended to be placed on the bracket to operate the spindle slide associated with the turntable so that the carriage does not open or close to hook with the knitting yarn from the knitting point anchor. In the production process of knitting machine, the equipment runs for a long time. The static and dynamic deformation time of the machine is changing, which makes the local and systematic errors of the fastening or connecting parts increase gradually. Finally, the relative position of some parts is moved to change the process distance. Check whether the key process parts and fastening connectors of each machine are loose, and fasten the loose parts in time. The standard fastening joint should be purchased from the national designated factory. The tightening operation method of unified fasteners should avoid under tightening or over tightening, which may lead to fastener failure or shorten the service life. In order to maintain the performance of the equipment, according to the standard equipment inspection, the device early detection of abnormal state, and establish a system to check the latitude center is an important means to improve the maintenance work. The so-called inspection is the key part of the equipment inspection of the project. |
| 【Refresh】【Favorites】【Print】 【Close】 |
| Previous:The usability of high speed knitting machine and the rapidity of operation Next:What should be done when assembling automatic knitting machine |
