| Precautions for operation of high speed knitting machine? |
| Hits：926 AddTime：2021/12/13 10:49:20 |
| Equipment operation safety is a link that can not be ignored in enterprise production. During the operation of high-speed knitting machine, it should also be in strict accordance with the safety specifications: 1、 Operators must wear labor protection articles. 2、 Equipment grounding must be firm and reliable. 3、 Before using the equipment, check whether the power switch and wires are intact, whether all transmission parts are filled with various lubricating oils, and whether the screws at all parts are loose. 4、 Check and ensure that the anti rotation guide plate of the strand reel support is free of deformation and the guide wheel pin shaft is free of abnormalities. 5、 During assembly, check and confirm that the left and right twist direction and quantity of strand free wire are wrong. In case of abnormal oil supply of the lubrication system, it shall be shut down immediately for treatment Timely report to the person in charge of the knitting machine. 6、 Adjust the tension of strands before startup, and ensure that the tension of each strand is uniform and equal. During operation, observe whether the tension of the strand rope is uniform and whether the strand rope jumps. In case of unevenness and jump, adjust it in time to ensure uniformity. If reel is found If the screws of the end cover are loose, they shall be fastened in time to avoid uneven wire adjustment caused by the collision between the screw and the wire frame. 7、 The grease temperature on the surface of the steel wire rope rises to the specified indication. Pay attention to the grease on the surface of the steel wire rope at any time to ensure that the oil on the surface of the steel wire rope is appropriate and uniform. 8、 In case of any abnormal phenomenon or abnormal sound, stop the machine immediately for inspection and handle it well. If it cannot be handled, report to the person in charge of knitting machine production in time, If the person in charge cannot handle it, the person in charge shall report to the plant leader. 9、 Strictly and carefully record the on duty situation of the shift, write clearly, strictly perform the shift handover procedures, and ensure that the problems of the shift are in the position of the shift Except under special circumstances. 10、 Pay attention to the clearance fit between the wire frame and the stator at any time during operation. If it is loose, it shall be fastened at any time to prevent accidents. In the process of taking up and arranging the line, it shall be timely Adjust torque motor control. Safety production is the top priority of enterprise production. The production and operation of weaving machine is relatively safe compared with other equipment, but the production safety management can not be ignored. |
| 【Refresh】【Favorites】【Print】 【Close】 |
| Previous:Analysis of application characteristics of high speed knitting machine Next:Safety details for operation of knitting machine |
