The high-speed rope weaving machine uses variable frequency and stepless speed regulation, with sensitive yarn breaking and stopping, synchronous feeding of the core and control of yarn breaking, low energy consumption and high output. It is widely used for weaving various circular or flat non elastic and elastic rope belts, mainly weaving various high-quality products such as rope belts, shoelaces, elastic belts, decorative belts, high tensile belts, fishing nets, fishing lines, trailer ropes, marine ropes, sports belts, curtain belts, wires, fibers, etc. How can we ensure product quality? Share the key points of high-speed rope weaving machine in production.
Point 1: The phenomenon of the high-speed rope weaving machine suddenly stopping during the weaving process is due to a broken thread or the thread has been used up. After taking appropriate measures, the machine can be turned on and continue weaving.
Key point 2: Handling of shield layer of high-speed rope weaving machine that does not meet the specified requirements. During the weaving process, if it is found that the shield layer being woven does not meet the specified requirements, the machine should be stopped at any time to remove the weaving of metal wires on this length. After disposal, normal weaving can be resumed.
Key point 3: The high-speed rope weaving machine should strictly follow the quality control requirements for production during weaving, strictly follow the process card regulations sent by the company to the high-speed rope weaving locomotive room, control the process parameters, and keep inspection records.
Key point 4: Cutting and labeling of high-speed rope weaving machine wire. During the operation of the high-speed rope weaving machine, a complete wire reel requires one end to the end. If there are internal joints that need to be cut, the reason must be indicated in the middle of the label and the length of the front section must be specified.
Finally, in the operation of the high-speed rope weaving machine, in order to improve quality and work efficiency, the layout lines should be strictly organized and arranged tightly, without the phenomenon of cross ups and downs.