PRODUCTS LIST

CONTACT US

Jiangsu xiangdao Precision Machinery Co., Ltd

Tel:0515-85998588

Mob:13601881820

E-mail:shxuyu@126.com

Add:No.16, nanshenzao industrial concentration zone, Annan Industrial Park, Dongtai City, Jiangsu Province

NEWS

Location: HOME >>NEWS >> 新闻动态
Maintain and repair the weaving machine properly
 Hits:412 AddTime:2023/7/5 11:21:49
Nowadays, weaving equipment has been successfully used in multiple places, usually specifically for weaving clothing, ropes, elastic belts, etc. However, it is worth mentioning that its long-term use is bound to cause wear and tear or malfunction. Therefore, it is necessary to do some major and minor repairs in daily life, and we must remember some important aspects.
The repair of a weaving machine involves disassembling the components of the mechanical weaving part, organizing and cleaning them, replacing the parts that are expected to be damaged before the next major repair, and then installing and adjusting them according to the requirements of minor repairs. The repair usually takes about 24 months of normal operation of the weaving machine.
During major repairs, all mechanical components should be disassembled and thoroughly cleaned. Worn and worn parts should be repaired, and any parts that exceed their service life should be removed. Then, comprehensive installation and adjustment should be carried out according to the requirements of major repairs. Major repairs are usually carried out after about 96 months of normal operation of the large round machine.
At the same time, the main goal of key maintenance is to remove dust and flying flowers from various parts of the machinery, clean the weaving machine components, and replace damaged parts. The weaving machine mainly composed of cotton yarn needs to undergo key maintenance on the weaving components of the machinery after about 6 months of normal operation.
The weaving is mainly made of chemical fiber yarn, which can undergo key maintenance after about 12 months of normal operation. The specific operation is to remove the impeller, walking horse spindle, tension spring, etc., clean the platform, bearings, etc., and then reinstall them. The walking horse spindle (walking horse head, yarn tube) is readjusted until it starts up and runs normally, and the fabric quality is guaranteed.
【Refresh】【Favorites】【Print】 【Close】
Previous:Advantages in the use of high-speed steel wire weaving machines Next:How to better use high-speed weaving machines

About us

TEL:

(+86)13601881820

Add:No.16, nanshenzao industrial concentration zone, Annan Industrial Park, Dongtai City, Jiangsu Province

Jiangsu xiangdao Precision Machinery Co., Ltd.